There were 472 press releases posted in the last 24 hours and 216,018 in the last 365 days.

Cleaning up: Fieldwork on Bellingham waterfront's largest cleanup site

How do you investigate a sediment cleanup site… mostly underwater? Crews with survey instruments from boats and scuba divers using underwater cameras, sonar, and jet probes are up to the challenge!

We're getting ready to clean up the rest of Bellingham Bay’s largest cleanup site: Whatcom Waterway.

First we have to gather additional information to help design the remaining cleanup work.

Beginning now through late September, contractors will test in-water sediment and survey existing structures and the sea floor in certain areas of the Whatcom Waterway site.

Where is this site in the cleanup process?  And what happens next?

Steps in Washington's formal cleanup process.

The Whatcom Waterway site is divided into two areas, Phase 1 and Phase 2. And good news — we completed the cleanup of Phase 1 areas  in 2016. For the cleanup of Phase 2 areas, we are now nearing the final steps of Washington’s formal cleanup process, guided by the Model Toxics Control Act (MTCA).

The planned fieldwork, called a pre-remedial design investigation, will provide additional information to complete engineering design of the cleanup action for Phase 2 areas.

The Port of Bellingham along with other state and city agencies, and a private company (known collectively as Potentially Liable Parties or PLPs) are conducting this fieldwork in accordance with a Consent Decree with Ecology.

Engineering design and permitting for cleanup of Phase 2 areas will take about two years to complete, with construction work beginning as early as 2023. The cleanup work will include dredging with off-site disposal, dredging with on-site consolidation, and capping.

Where will fieldwork occur?

The fieldwork will occur on the Bellingham waterfront adjacent to the Bellingham Shipping Terminal and the former Georgia Pacific Log Pond, and within and adjacent to the 29-acre former Georgia Pacific Aerated Stabilization Basin.

Click on the image to the right to view a map of the planned fieldwork areas.

What will I see happening on the Bellingham waterfront?

Some of the fieldwork will be visible above water, but much of the testing and survey work will occur underwater. For specific testing and survey location maps, see the pre-remedial design investigation work plan.

Sediment testing

Example of vibracore sediment sampling equipment.

To evaluate how Whatcom Creek and stormwater may affect the site, contractors will collect 15 surface sediment grab samples from the headwaters of Whatcom Waterway and in Whatcom Creek, and at stormwater discharge locations.

Research diver during Phase 1 surveys.

To evaluate the extent of contamination in subsurface sediment, crews will collect sediment from 28 subsurface vibracores in the open waters of Whatcom Waterway and at 14 more locations under the piers. Crews will collect these vibracore samples either from a boat, guided by remote platform, or with scuba divers. A vibracore is a hollow tube that’s vibrated into the sediment to collect a continuous sediment sample across varying depths.

Aerated Stabilization Basin (ASB) testing

Aerated Stabilization Basin (ASB), May 2019.

From a small boat, crews will test the strength of the soft sediments using the vane-shear method at 19 different locations in the industrial waste treatment lagoon, also called the Aerated Stabilization Basin or ASB. The vane-shear method calculates sediment strength as an inserted blade rotates under the surface. Up to four vibracore samples will also be collected in the ASB to evaluate subsurface sediment.

Eelgrass surveys

Eelgrass (photo from Washington State Department of Natural Resources).

Contractors will conduct surveys of eelgrass and other large aquatic plants (macroalgae) using towed video, sonar, diver and/or shoreline survey methods.

These surveys will inform where cleanup work may overlap habitat areas.

Under-pier surveys

To survey under piers, crews will use conventional surveys such as weighted lines to measure the floor depth. Divers will also use jet probes to survey the sea floor. Jet probes force air and water through the tip of a thin hollow tube to estimate sediment type and depth as well as other hard underwater objects.

Funding

Pre-remedial design investigation activities are expected to cost just over $500,000. The port, in its role as lead PLP, will incur this cost. The port is eligible for reimbursement of up to half of their cost from Ecology through the state’s Remedial Action Grant Program, which helps pay for the cleanup of publicly-owned sites. The Legislature funds the grant program with revenues from a tax on hazardous substances

Cleaning up Bellingham Bay

The Whatcom Waterway site is one of 12 Bellingham Bay cleanup sites coordinated through the Bellingham Bay Demonstration Pilot. The pilot is a bay-wide multi-agency effort to clean up contaminated sediment, control sources of sediment contamination, and restore habitat, with consideration for land and water uses. In 2000, participants in this initiative developed the Bellingham Bay Comprehensive Strategy.