KEMP, Texas, Nov. 20, 2018 (GLOBE NEWSWIRE) -- Larson Electronics, a Texas-based company with over 40 years of experience spearheading the industrial lighting sector, announced the release of an explosion proof two-color signal stack light that is rated Class I, Divisions 1 and 2 and Class II, Divisions 1 and 2 for use in wet locations and marine environments. This LED signal stack light is equipped with an analog input/output MODBUS control module for connection to remote alarms.

Equipped with an analog input/output control module, this MODBUS-capable signal stack light light is designed for routing traffic in industrial refueling stations and processing status indications in manufacturing facilities.

The EPL-TL-2X10W-C-MOD3 explosion proof two-color traffic light has a temperature rating of T3C and a -40˚C to 85˚C ambient operating temperature range. Line-in power supply is provided via 10 feet of 16 AWG SOOW cable with flying leads, and independent operation is possible through individual leads per lamp. This unit comes equipped with a MODBUS control module to enable connection to remote alarms and allows up to 4 sensor control wires to be connected. The EPL-TL-2X10W-C-MOD3 is available in 120-277V AC and 11 or 24V DC or VAC configurations.

This unit comes equipped two colored LED lights – one red and one green – and clear glass globes, which increase the total visibility and light output. The standard light configuration is red and green LED bulbs that burn constantly or in a strobe configuration, however multiple light combinations and beam configurations can be chosen. These LEDs have a 50,000-hour lifespan. This traffic light is made of polyester powder coated copper-free aluminum casting that can withstand 1490 lbs. PSI hydrostatic pressure, and has a mounting plate made of non-sparking aluminum.

This explosion proof traffic light is MODBUS capable through an RS485 connector that can be used to setup a two-step warning system. Operators can activate or deactivate each light separately with a master/slave communication protocol, which uses a different trigger for each light. This device is suitable for use in industrial refueling stations and manufacturing facilities.

About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.

For further information, please contact:

Rob Bresnahan, President and CEO
Toll-free: 1-888-351-2363
Int’l: 214-616-6180
Fax: 903-498-3364
E-mail: sales@larsonelectronics.com

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/825345bc-8026-45f3-8659-c0047d4232bb

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.