World premiere: Exclusive new edition of the Porsche 935
Current Press releases
World premiere: Exclusive new edition of the Porsche 935
Clubsport race car with 700 hp at the anniversary of 70 Years of Porsche Sports Cars
Stuttgart
.
The race car’s technology for clubsport events and private training on racetracks is based on the 911 GT2 RS high-performance sports car. Like its historic predecessor, most of the body has been replaced or supplemented by carbon-fibre composite parts (CFRP). With its streamlined extended rear, the 935 reaches a length of 4.87 metres. The width of the exclusive clubsport racer measures 2.03 metres.
The spectacular aerodynamics is a completely new development and pays tribute to the
Many details of the exterior are a salute to winning vehicles from the company’s motor racing history: The aerodynamically capped rims echo those of the 935/78, with the LED rear lights on the rear wing endplates adopted from the 919 Hybrid LMP1 race car. The side mirrors hail from the current Le Mans-winning 911 RSR, with the exposed titanium tailpipes modelled on the
These references are carried through to the cockpit. The knob on the gearshift lever has a laminated wood design and is reminiscent of racers such as the 917, the 909 Bergspyder and the
The new 935 is powered by a state-of-the-art 3.8-litre six-cylinder twin-turbo engine, which is largely identical to the high-performance standard unit mounted in the road-legal 911 GT2 RS. Power is transferred to the rear engine via a seven-speed
Like the road-legal 911 GT2 RS, the 1,380-kilogram 935 is equipped with PSM (
The new
Technical description
Concept:
• Single-seater near-standard non-homologated race car.
• Basis:
Weight/dimensions: • Weight: ca. 1,380 kg • Length: 4,865 mm • Width: 2,034 mm (incl. side mirrors) • Total height: 1,359 mm • Wheelbase: 2.457 mm
Engine: • Water-cooled 6-cylinder aluminium twin-turbo rear-mounted boxer engine and rigid suspension; 3,800 cc; stroke 77.5 mm; bore 102 mm; ca. 515 kW (700 hp) • 4-valve technology with camshaft adjustment and valve-lift switchover Vario-Cam Plus • Electronic engine management (Continental SDI 9) • DMSB-approved 100-cell metal catalytic converter • Rear silencer with twin tailpipes mounted centrally, Heritage Design
Transmission: • 7-speed PDK gearbox with rigid suspension and short throw • Dual mass flywheel • Internal pressurised oil lubrication with active oil cooling • Limited slip differential optimised for racing
Bodywork: • Weight-optimised bodyshell in aluminium-steel composite design with carbon-fibre Kevlar add-on parts to improve aerodynamics and stability • Rear wing with lights integrated in endplates • Enlarged air inlets with integrated LED headlights in 4-point design • Removable escape hatch in roof complying with FIA Art. 275a • Aerodynamically optimised side mirrors • 115-litre FT3 safety fuel cell with fuel cut-off safety valve in compliance with FIA Art. 253 in the front, optional with fast-fill coupling • Welded-in safety cage • Recaro racing bucket seat with longitudinal seat adjustment and padding system in accordance with FIA Standard 8862/2009 • 6-point safety harness • Air jack system (three jacks) • Fire extinguishing system with electronic release unit
Suspension: Front axle: MacPherson suspension strut; forged suspension links, optimised stiffness with high-performance spherical bearings, centre-locking wheel nuts; 3-way racing dampers, reinforced tie-rod; Electro-mechanical power steering with variable steering ratio; anti-roll bar
Rear axle: Lightweight multi-link suspension, strut ball jointed (Unibal); centre-locking wheel nuts; 3-way racing dampers; anti-roll bar
Brakes: Brake system: • Two separate brake circuits for front and rear axles; adjustable via brake balance bar system
Front axle: • Six-piston aluminium monobloc racing brake callipers with anti-knock-back piston springs; steel brake discs, internally ventilated with 380 mm diameter, racing brake pads, optimised brake cooling ducts
Rear axle: • Four-piston aluminium monobloc racing brake callipers with anti-knock-back piston springs; steel brake discs, internally ventilated with 355 mm diameter, racing brake pads, optimised brake cooling ducts
Electrical system:
• Instrument cluster consisting of COSWORTH ICD with integrated data logger, sport Chrono watch and boost gauge in a vintage finish
• CFK multifunction steering wheel with pit speed limiter and quick-release coupling
• PSM (
Rims/Tyres: Front axle: One-piece light-alloy forged wheels 11.5J x 18 offset 15.3 with centre-locking nut; Michelin transport tyres 29/65-R18
Rear axle: One-piece light-alloy forged wheels 13J x 18 offset -10 with centre-locking nut; Michelin transport tyres 31/71-R18
Colour: Agate gray water-based paint; optional: Martini livery
Vehicle price: 701,948 Euro plus country-specific VAT. Delivery from June 2019
911 GT2 RS: combined fuel consumption 11.8 l/100 km; CO2 emissions 269 g/km
Please note: Press releases, photos and videos are available to download on http://presse.porsche.de. The Twitter channel @
9/27/2018
Further information and pictures for journalists and media representatives can be found on the
Legal Disclaimer:
EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.
