There were 1,811 press releases posted in the last 24 hours and 403,644 in the last 365 days.

Larson Electronics LLC Releases 30 KVA Temporary Power Distribution System

KEMP, Texas, April 16, 2018 (GLOBE NEWSWIRE) -- Larson Electronics LLC, a leading industrial lighting company, released a temporary power distribution system that converts 480V AC current into single phase 120V AC and 208V AC 60 Hz. This portable power distribution system makes it safe and easy to tap into 480V AC power and distribute it to a variety of electrical equipment indoors and outdoors where grid power is unavailable, such as aircraft hangars, shows, shipyards and construction sites.

MGL-60C-30KVA-4X120.20A-1X208.50A-E18 Main Angled
The Larson Electronics MGL-60C-30KVA-4X120.20A-1X208.50A-E18 temporary power distribution system converts 480 VAC current to single phase 120V AC and 208V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.


MGL-60C-30KVA-4X120.20A-1X208.50A-E18 Front
The Larson Electronics MGL-60C-30KVA-4X120.20A-1X208.50A-E18 temporary power distribution system converts 480 VAC current to single phase 120V AC and 208V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.


MGL-60C-30KVA-4X120.20A-1X208.50A-E18 Back
The Larson Electronics MGL-60C-30KVA-4X120.20A-1X208.50A-E18 temporary power distribution system converts 480 VAC current to single phase 120V AC and 208V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.


MGL-60C-30KVA-4X120.20A-1X208.50A-E18 Ground
The Larson Electronics MGL-60C-30KVA-4X120.20A-1X208.50A-E18 temporary power distribution system converts 480 VAC current to single phase 120V AC and 208V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.


MGL-60C-30KVA-4X120.20A-1X208.50A-E18 Dolly Cart
The Larson Electronics MGL-60C-30KVA-4X120.20A-1X208.50A-E18 temporary power distribution system converts 480 VAC current to single phase 120V AC and 208V AC 60 Hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power.


The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 is a mobile temporary transformer that allows operators to power their equipment on converted 480V AC power. This portable power distribution is designed to operate with 480V, three phase, 60hz which it then steps down to three phase 120V AC and 208V AC via a 30K VA transformer. Secondary current is wired to a 120/208V, single phase, 100-amp load center with main breaker for circuit protection. 120/208V line out protection is provided by three 20-amp, 125V, single pole breakers and one 50-amp, 250V, 2 pole breaker. The 120V AC power is then available via four 5-20R 20amp, 125V GFCI protected duplex receptacles and the 208 VAC power is available via one CS8369 50amp, 250V receptacle.

The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 is potted and built to UL 1640 standards with a NEMA 3R rated load center. The transformer, along with the load center/distribution assembly, is mounted to a dolly cart style frame made of powder-coated steel. This stable and durable platform with two run-flat rubber tires provides operators with great mobility throughout the worksite. A center point lift is including so the unit can be easily lifted with cable or chain hooks. A 60' 4/4 SOOW line-in cable is included to connect the substation to a primary 480V primary power supply and a fused disconnect is included for primary line-in protection and to supply primary power to the 30 KVA transformer.

"The MGL-60C-30KVA-4X120.20A-1X208.50A-E18 provides operators with the ability to tap safely into 480 voltage to power equipment independently from the work area," said Rob Bresnahan, CEO of Larson Electronics LLC. "We can also modify this assembly to meet operator needs up to 150 KVA and change the cart to a trailer or skid mounted configuration."

About Larson Electronics LLC: Larson Electronics LLC is a manufacturer of industrial lighting equipment and accessories. The company offers an extensive catalog of industry-grade lighting and power distribution products for the following sectors: manufacturing, construction, food processing, oil and gas, military, marine and automobile. Customers can benefit from the company’s hands-on, customized approach to lighting solutions. Larson Electronics provides expedited service for quotes, customer support and shipments.

For further information, please contact:
Rob Bresnahan, President and CEO
Toll-free: 1-800-369-6671
Phone: 214-616-6180
Fax: 903-498-3364
E-mail: sales@larsonelectronics.com

Photos accompanying this announcement are available at
http://resource.globenewswire.com/Resource/Download/8aea5238-dd9b-4cd3-855b-dc02ab7be04f

http://resource.globenewswire.com/Resource/Download/8fd17658-ea4a-4fee-998b-3965a0ea7d92

http://resource.globenewswire.com/Resource/Download/364b541a-396d-4a29-ada4-3d7d4415e615

http://resource.globenewswire.com/Resource/Download/938bb387-3929-4b15-b843-ce72a508460a

http://resource.globenewswire.com/Resource/Download/09ca95b2-2494-4a3f-b5f5-de69073d0d15

Primary Logo