Spectroline Super-Capacity UV Wafer Erasing System Does a Lot of Work in a Little Amount of Time
/EINPresswire.com/ -- WESTBURY, NY--(Marketwired - April 11, 2016) - Spectroline's PC-10020-LT UV EPROM/Wafer Erasing System is engineered with the latest technological advances in the industry. This "super-capacity" unit ensures the highest UV intensity, fastest erasing time and improved safety features.
The PC-10020-LT features ten short-wave UV (254 nm), ozone-free, quartz grid lamp assemblies mounted on specular aluminum reflectors. These high-intensity grid lamps produce up to four times the throughput of competitive systems. Their nominal initial UV intensity of 70,000 µW/cm² ensures the quickest and most complete erasure of programmed memory -- in as little as 90 seconds.
The cabinet's extra wide and deep drawer capacity ensures easy loading of wafers. The loading drawer can accommodate a removable tray insert that is adjustable to varying heights to maintain the optimum UV exposure distance. It has an extra-large load capacity of 6 −12 in (300 mm), 15 − 8 in (200 mm) or 28 − 6 in (150 mm) wafers. A light tower has red/yellow/green signals that indicate mode status at every stage of system operation.
The PC-10020-LT has a two-piece, modular cabinet design and is ruggedly constructed of anodized aluminum and stainless steel.
For more information, call toll-free 1-800-274-8888. Outside the U.S. and Canada, call 516-333-4840 or check us out at www.spectroline.com.
Headquartered in Westbury, New York, Spectronics Corporation invented fluorescent leak detection in 1955, and remains the world's leading manufacturer of ultraviolet equipment and fluorescent dyes. Spectroline
Image Available: http://www.marketwire.com/library/MwGo/2016/4/11/11G092845/Images/PC-10020_UV_EPROM_Wafer_Erasing_System-b05d4848a8498f0a9395a8e3258e07ad.jpg
Attachment Available: http://www.marketwire.com/library/MwGo/2016/4/11/11G092845/EPROM_Lit--A90131-3-5b421332f355bff1a667d1fb06f72bb4.pdf
Attachment Available: http://www.marketwire.com/library/MwGo/2016/4/11/11G092845/PC_Series_Catalog-82798935dd91a5ca9bf88a74142968af.pdf
Contact:
Spectronics Corporation
info@spectroline.com
Specially designed to meet the critical production requirements of high-density EPROMs and wafers, this "super-capacity" unit incorporates the latest technological advances in the industry to ensure the highest UV intensities, fastest erasing times and improved safety. Red/yellow/green signals indicate mode status at every stage of system operation. The system is engineered for maximum irradiance uniformity, boasting a nominal initial UV intensity output of 70,000 μW/cm² - producing the quickest and most complete erasure of programmed memory. It provides an erasing cycle times as fast as 90 seconds. 28 - 6 in (152 mm) wafers 15 - 8 in (200 mm) wafers 6 - 12 in (300 mm) wafers
Legal Disclaimer:
EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.
