There were 11 press releases posted in the last 24 hours and 171,534 in the last 365 days.

Nano One Process Optimization Boosts Battery Power

VANCOUVER, British Columbia, April 12, 2017 (GLOBE NEWSWIRE) -- Dr. Stephen Campbell, Principal Scientist at Nano One Materials (TSX-V:NNO) (Frankfurt:LBMB) (OTC:NNOMF), today announced process improvements that further boost power and lower the cost for lithium ion cathode materials.

Cannot view this image? Please visit:
https://orders.newsfilecorp.com/files/3606/26147_a1491985942782_4.jpg

Initial discharge curves showing improved performance of High Voltage Spinel (LiNi0.5Mn1.5O4) using Nano One’s advanced and optimized process.

“I am pleased to report that recent optimization of Nano One’s proprietary process adds to the high voltage spinel improvements announced earlier this year,” said Dr Campbell. “The Nano One process eliminates the 4-Volt plateau in the discharge curve allowing the delivery of constant power across the whole charge range. This is an important advantage for vehicle and stationary energy storage applications as the higher voltage reduces heating, aids durability and simplifies the power management systems. In addition, the absence of cobalt and the use of low cost lithium carbonate in our process directly address raw material constraints in the supply chain.”

These technology advances were developed with the ongoing support of the National Research Council of Canada Industrial Research Assistance Program (NRC-IRAP) under the Cobalt Free High Voltage Spinel project announced on June 30, 2016.

Dr. Campbell added “High-voltage spinel will be a vital component of next generation high power batteries and with the support of IRAP, Nano One is positioning its technology to play a key role in the commercialization effort.”

Cannot view this image? Please visit:
https://orders.newsfilecorp.com/files/3606/26147_a1491985942892_59.jpg

Rate Capability chart showing energy levels for Nano One’s HV-Spinel (LiNi0.5Mn1.5O4) and commercial grade NMC (LiNi1/3Mn1/3Co1/3O2) at different rates of discharge. Spinel retains more energy (i) at higher rates of discharge and (ii) from cycle to cycle.

/EIN News/ -- Nano One Materials Corp.

Dan Blondal, CEO

For information with respect to Nano One or the contents of this news release, please contact John Lando (President) at (604) 669-2701 or visit the website at www.nanoone.ca.

About Nano One:

Nano One Materials Corp (“Nano One” or “the Company”) is developing patented technology for the low-cost production of high performance battery materials used in electric vehicles, energy storage and consumer electronics. The processing technology addresses fundamental supply chain constraints by enabling wider raw materials specifications for use in lithium ion batteries. The process can be configured for a range of different nanostructured materials and has the flexibility to shift with emerging and future battery market trends and a diverse range of other growth opportunities. The novel three-stage process uses equipment common to industry and Nano One is building a pilot plant to demonstrate high volume production. The pilot plant is being funded with the assistance and support of Sustainable Development Technology Canada (SDTC) and the Automotive Supplier Innovation Program. Nano One also receives financial support from the National Research Council of Canada Industrial Research Assistance Program (NRC-IRAP). Nano One’s mission is to establish its patented technology as a leading platform for the global production of a new generation of nanostructured composite materials. For more information, please visit www.nanoone.ca

Certain information contained herein may constitute “forward-looking information” under Canadian securities legislation. Forward-looking information includes, but is not limited to, statements with respect to the actual receipt of the grant monies, the execution of the Company’s plans which are contingent on the receipt of such monies and the commercialization of the Company’s technology and patents. Generally, forward-looking information can be identified by the use of forward-looking terminology such as 'believe', 'expect', 'anticipate', 'plan', 'intend', 'continue', 'estimate', 'may', 'will', 'should', 'ongoing', or variations of such words and phrases or statements that certain actions, events or results “will” occur. Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking statements or forward-looking information, including: the completion of final documentation with SDTC and the receipt of all necessary regulatory approvals. Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. The Company does not undertake to update any forward-looking statements or forward-looking information that is incorporated by reference herein, except as required by applicable securities laws.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE

Primary Logo

Distribution channels: Building, Construction